0

Out of 0 Ratings

Owner's of the Frigidaire Clothes Dryer Frigidaire Front Load Dryer gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 3
 
Specifications
subject to change.
Specifications
subject to change.
USA
10200 David Taylor Drive
Charlotte, NC 28262
1-800-FRIGIDAIRE
frigidaire.com
CANADA
5855 Terry Fox Way
Mississauga, ON L5V 3E4
1-800-265-8352
frigidaire.ca
Front Load Dryer
FFQG5000QW 7.0 Cu. Ft. D.O.E. Gas
Front Load Laundry - Gas Dryer
Frigidaire Affinity (All L & P Models)
Front Load Dryer Specifications
Product Shipping Weight (approx.) – 140 Lbs.
An electrical supply with grounded three-prong receptacle is
required. The power supply circuit must be installed in accordance
with current edition of National Electrical Code (ANSI/NFPA 70)
and local codes & ordinances. (Do not use same circuit as washer.)
Voltage Rating – 120V / 60 Hz / 15 Amps
Amps @ 120 Volts = 7 Amps
Connected Load (kW Rating) @ 120 Volts = 0.75 kW
Equipped with 120V 3-wire power supply cord, approx. 60" long.
Always consult local and national electric, gas & plumbing codes.
Can be installed alone, with or without optional 15" Pedestal Drawer,
or stacked above matching Frigidaire® Washer, which requires
installation of optional Dryer Stacking Kit. (For installation details, refer
to instructions included with optional pedestal or stacking kit or on web.)
Can be built in with matching Frigidaire® Washer in under-counter,
recessed or closet installation. (Refer to Built-In Installations on this
page for cutout dimensions. For additional installation details, refer to
Product Installation Guide on web.)
Closet installation requires vented door with 2 unobstructed louvered
openings, minimum 60 sq. in. each, located 3" from top and bottom of
door. Full-length 120 sq. in. opening also acceptable. Allow additional
1" clearance between fronts of units and closed door.
Do NOT install in area exposed to dripping water or outdoor weather
conditions; where gasoline or other flammables are kept or stored; or
where dryer comes in contact with curtains, drapes or anything that
will obstruct flow of combustion and ventilation air.
For garage installation, dryer MUST be located minimum 18" above floor.
Floor MUST be solid with 1" maximum slope. Do NOT install on
carpeted surface.
Dryer MUST exhaust to outside of building, NOT into any concealed
space.
Exhaust installation requires minimum 4"-diameter rigid or semi-rigid
metal duct with approved, unobstructed vent hood having swing-out
damper(s). If installing rigid metal duct (preferred), do not exceed
MAXIMUM venting run length of 64 ft., allow deductions for elbows
and vents. If installing semi-rigid metal duct, do not exceed MAXIMUM
venting run length of 8 ft., always allow deductions for elbows and
vents (Refer to Product Installation Guide on web for additional
information). Do NOT use flexible plastic or metal foil duct and use
shortest run possible.
Gas supply line should be 1/2" pipe and MUST have individual
shutoff valve.
Leveling legs supplied to level dryer properly and reduce excessive
noise and vibration.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
Optional Accessories
Dryer Stacking Kit – (PN # STACKIT4X).
15" Classic White Pedestal Drawer – (PN # CFPWD15W).
Mobile Home Installation Kit – (PN # 137067200).
LP Gas Conversion Kit – (PN # PCK4200).
Drying Rack – (PN # 137067300).
FFQG5000Q 03/14 © 2014 Electrolux Home Products, Inc.